JalcoSales.com
120 Fairwood Blvd
Mountain Top PA 18707 USA
T: 570.474.9097

Machinery

Kolbus Headliner HL 5 station
Kolbus 3 wing
Gane Bros Rounder/backer
Crawley 6 station building in machine serial # 61-66-10 ( hooked-up and working)
Polar Cutter 72 CE
2 Fleetline F1-7000 tape machines
Champion wire stitcher
Duplo DC485H Collator
Xerox docuprint 65
Pictures available
MAKE OFFER
Contact

SPINE CUTTER
This machine will cut spine strips for your flat back cover, game board or for
any other product requiring an accurate, clean cut strip
Specs:
Board thickness from 40 to 120 Pt.
Minimum width 1/4" ( 6mm)
Maximum width 4" ( 102 mm)
Max Spine board length 15" ( 382 mm)
Speed up to 60 cuts per minute
These machines are brand-new, custom built. Therefore please allow 6 - 8 weeks for delivery
Pictures available US$13995
Contact

CRATHERN LITHO LAMINATOR
405W Gluer with a Crathern FB3 spotter.
Maximum size sheet is 38 x 50
Requires compressed air at 12 CFM at 90 PSI
Glue tank Jacket needs water piped to the machine for cleaning and heat if animal glue is used
All manuals and documentation available. Seller willing to train machine operator
US$19900 EXW
Contact


1990 KOLBUS MODEL SU DUST JACKETING MACHINE
In very good working condition
Under power and may be seen running
US$59900 EXW
Contact


WOHLENBERG VARIO - 20 PERFECT BINDING LINE
Equipped with 20 clamps
Roughing and Milling Station
Hot Melt Spine Glue System
Hot Melt Side Glue System
Optional Cold Glue System
Pre-Melter
Continuous Stream Cover Feeder with Gathering Machine with 18 pockets
Hand Feed Station
Vertical Escapement Delivery to run Pre-Gathered Signatures
Jogger Infeed to Vario Binder
Muller Martini Model 3670 "Alpine" Three-Knife Trimmer
with Cassettes and Conveyors
Muller Martini Model 231 Counter Stacker
Machine in excellent condition and under power. Located in Northeast USA Pictures available US$171000 EXW
Contact

CLOTH CYLINDER Assembly
For Kolbus Model GD Casemaker
It includes the following Kolbus part numbers:
21-5-590 Cylinder, 21-5-591 Rod, 21-3-401 Ring, 21-3-396 Spring
Contact


CRAWLEY GLUING LINE
Model NGD
For hard cover book production
Very good running condition
Specification: Backgluing and drying machine that makes book block prior to being joined with the hard case
Consists of
Nipper that squeezes air out of sewn signatures
Gluing station which applies adhesive and removes excess glue
Heat tunnel automatically dries adhesive with 10000 watt lamps
Maximum speed: 3000 blocks per hr.
Minimum bulk: 1/4"
Maximum bulk: 2-3/4"
Spine length: 14"
Serial number 80-84
REDUCED : US$24,500 Contact

1970 KOLBUS KS54 SLITTER / SHEETER
US$8,900
Contact


LAWSON V65
46" Flat bed Cutter with power back gauge
US$4,900
Contact


THOMPSON 22" x 32" PLATEN DIE CUTTER
Style 1
US$4,900
Contact


JUDELSON GS ROLL SLITTER
US$4,400
Contact


GLUE PREMELTER
Two available
US$895 each
Contact


10 KW COSMOS ELECTRONIC RF HEAT SEALER
With 3 Station 8 ft diameter turntable
US$8,800
Contact


10 KW THERMO - DIELECTRIC INLINE RF HEAT SEALER
With Cosmos generator for production of Binders with:
Automatic Board feeder
Indexer
Cut off Knife
4 roll rollstand
US$8,800
Contact


1991 15 KW HISEN RF HEAT SEALER
With:
Robotic automatic Board feeder
6 Station 10 ft. diameter turntable
Microprocessor controls
US$30,900
Contact


BRIDGEPORT 9 x 42 VERTICAL MILLING MACHINE
Series I
J head with power table feed and vise
US$3,900
Contact


CHICAGO 2 HEAD RIVETERS
Four available
US$5,900 each
Contact




Home